Furnace Installation & Replacement Service
Oakland, Piedmont, Berkeley, Alameda & nearby areas
Harry Clark offers quality gas furnaces, heat pump systems, hybrid heating, wall furnace, and more to meet every heating and cooling need. No two homes are alike. Our proposals to you will be based on an accurate analysis of you home, and your needs. It considers the structural features of your home, and the lifestyle of your family.
Signs you may need a new furnace.
Strange sounds, system age, increased heating cost, increases in dust, or frequent repairs. Any one or more of the above could indicate its time to consider a new furnace and duct system. Nationally furnaces last 17-20 years. In the Bay Area, because of our moderate climate, furnace tend to last 20-30 years. A 30-year-old furnace in not efficient by today’s standards. Most of furnaces of that age use lots of gas and electricity. All new forced air furnace have electronic control motors that use 80% less electricity. Most furnaces are above 95% AFUE or gas efficient.
Harry Clark Heating and Air Conditioning Inc. is a
York Certified Comfort Expert & CCE Dealer.
Key features:
- Participate in ongoing training
- Install premium quality equipment
- Have proven success in creating and maintaining home comfort systems
- Harry Clark registers the products. That extends the parts warranties from 5 to 10 year
Following is sample of some of the system we can recommend:
YP9C 98% Modulating Gas Furnace
These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized
tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may
be converted for downflow applications.
Key features:
- 98% AFUE
- Compact 33″ Height and Standard Cabinet Widths
- Modulating gas valve for very energy efficient operation
- Multi-Position Design With Minimal Conversion Requirements
- ECM Variable-Speed Motor with Large, Quiet Blower
- Fewer starts and stops saves more fuel and operates more quietly
- For more air infiltration to improve indoor air quality
- Condensate Management System Eliminates the Need for External Condensate Traps
Warranty: Lifetime heat exchanger, 10-year parts
York TM9Y 96% Two Stage Two Speed Furnace
These compact units employ induced combustion, reliable hot surface ignition and high heat exchangers. Multi-poise, this unit can be installed upflow, downflow or horizontal. This system can be vented with approved plastic out the side wall or through roof.
Key Features:
- Two stage heating operation with two stage gas valve two stage inducer operation and constant torque ECM blower operation.
- Compact cabinet 33” tall, easy to install.
- Standard ECM Constant torque motor enhances cooling SEER, improves comfort, and can be used continuous for IAQ performance.
- Built in self diagnostics with fault display
- Low current draw
- Aluminized steel primary heat exchanger with stainless steel secondary heat exchanger
- Insulated blower compartment for thermal and acoustic performance
- Easy access doors
Warranties: Lifetime heat exchanger, 10-year parts
York TM9E 95% Single Stage Furnace
These compact units employ induced combustion, reliable hot surface iginition and high heat transfer heat exchangers. Multi-poise, these units can be installed upflow, downflow or horizontal. The system can be vant with approved plastic out the sidewall or through roof.
Key Features
- Simple single stage single stage and single speed operation.
- 5 Speed direct drive standard ECM high efficient DC motor
- Compact cabinet, 33” tall, easy to install.
- Built in self diagnostics with fault display
- Aluminized steel primary heat exchanger and stainless steel heat exchanger
- Insulated blower compartment for thermal and acoustic performance
- Easy access doors
Warranties: Lifetime heat exchanger, 10-year parts
ISO
9001
York TMLE 80% Single Stage ECM Gas Furnace
Key Features
- Efficiency levels up to 80% AFUE
- Designed for residential installation in a basement, closet, alcove, attic, recreation room, or garage, and also ideal for commercial applications
- Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary
- Compact, 33-inch height fits into tight spaces
- Fully insulated cabinet design
- 100% shut off main gas valve for extra safety
- Single-stage heating cycle maintains consistent comfort
- Standard, high-efficiency ECM fan motor ensures dependable air distribution
- Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability
